電源オプション

Aerogen電源オプションについて 

Aerogen Pro-X コントローラーと Aerogen USB コントローラー:再利用可能、柔軟かつポータブル

Aerogen Pro-X コントローラーについて-Aerogen の電源、

Aerogen Pro-X コントローラーについて- 侵襲的人工呼吸 (IMV)からハイフロー (HF)、非侵襲的人工呼吸(NIV)、および自発呼吸 (SV) まで、 ひとりの患者さんの呼吸療法全過程におけるAerogen テクノロジーの駆動電源Aerogen Pro-X コントローラー ポータブル電源は、30 分間モードと連続モードを備え、院内全体で吸入薬剤投与をサポートするために開発されました。 1

再利用可能

Aerogen Pro-X コントローラーは、セットアップが容易で、複数回、院内全体のさまざまな患者さんで使用できます。 1

柔軟性

薬剤投与のニーズに応して30分モードまたは連続モードの 2 通りのモードを使用可能 1

ポータブル

45分間使用可能な内臓バッテリーにより、どこでも必要な場所にPro-Xコントローラーを持ち運べます。オプションのマルチマウントアダプターを用いれば1 か所で長時間使用できます。 1


Aerogen Pro-X コントローラー

Aerogen USB コントローラー

Aerogen USB コントローラーについて – Aerogenの電源

Aerogen USB コントローラーについてポータブル電源。人工呼吸器や他の医療機器との USB 接続から、また他の機器のUSB ポートから操作できます (米国では使用できません)。Aerogen USB コントローラーでは、30 分と 6 時間の操作モードが選択可能。 IMVからHF、NIV、SV までひとりの患者さんの呼吸療法全課程でAerogen テクノロジーにパワーを供給します 2

再利用可能

Aerogen USB コントローラーはセットアップが容易で、複数回、院内全体のさまざまな患者に使用できます。 2

柔軟性

薬剤投与のニーズに応じて30分モードまたは6時間モードの2通りのモードを使用選択2

ポータブル

人工呼吸器や他の医療機器との USB 接続から、また他の機器のUSB ポートから (米国では使用できません)、さらにAerogen AC/DC アダプターオプションのプラグソケットから操作ができます 2

Aerogen コントローラー

製品サポート

Aerogen Ultra with a face mask for EMS use: set-up guide

Aerogen Ultra with mouthpiece for EMS use: set-up guide

Aerogen Solo on a NIV single-limb circuit for EMS use: set-up guide

Aerogen Solo on the dry side of the humidifier: set-up guide

Aerogen Solo for adult nasal high-flow: set-up guide

Aerogen Solo for paediatric nasal high-flow: set-up guide

Aerogen Solo at the wye: set-up guide

Aerogen Continuous Nebulisation Tube: set-up guide

Aerogen Ultra: set-up guide

General

I have a medical/clinical query, or my query is not addressed below. Who can I contact for medical or clinical information related to the use of Aerogen products?

Please contact Aerogen Medical Affairs directly for medical information/published clinical research regarding the use of Aerogen products. Email: MedicalScience@aerogen.com (US/Canada/LATAM) or msl@aerogen.com (all other countries).

What medications can be used with the Aerogen Solo, Aerogen Pro?

The Aerogen Solo & Aerogen Pro should be used with physician prescribed medications for inhalation which are approved for use with a general purpose nebuliser.¹ Should you require information on a whether a medication is approved for inhalation please contact the medication manufacturer directly.

Should I adjust the drug dosage when I’m using the Aerogen Solo, Aerogen Pro?

Information on drug dosing must be sourced from the manufacturer’s approved prescribing information for the inhaled formulation. Aerogen Ltd cannot provide specific advice on medication dose.

Is the drug affected if it causes discoloration of the water in a humidifier?

Occasionally, a change in the colour of the water in a heated humidifier has been noted with certain medications if aerosolized proximal to the humidifier. Should you have concerns related to a specific medication please do not hesitate to contact the Medical Affairs team at the email addresses listed above for assistance. The treating clinician should always consider a medications SPC and/or consult with a pharmacist/hospital pharmacy to determine whether placement proximal to the humidifier is suitable for a given therapeutic. Aerogen devices are approved for use in a number of positions offering the treating health care professional a range of placement options if discoloration is a concern. These positions are detailed in the directions for use documents which are accessible on the website.¹

What do I do if crystals form in the nebuliser chamber?

Any medication that has a high ionic concentration, for instance hypertonic saline solutions, if permitted to dry on the Aerogen Vibronic aerosol generator in the nebuliser chamber, may form visible crystals. In the event where crystallisation is observed in the Aerogen Solo, Aerogen recommend to aerosolise a few drops of normal saline solution to clear any residual crystallisation.

How do you remove residue in the chamber after nebulisation of viscous drugs?

Should you wish to remove any viscous drug residues from the Aerogen Solo medication reservoir you may nebulise a few drops of normal saline.

What effect does bias ventilator flow have on aerosol output and deposition?

The impact of bias ventilator flow on aerosol deposition depends on the location of the aerosol generator in the circuit. An in vitro study by Ari et al., (2010) assessing aerosol delivery during mechanical ventilation in the presence of bias flow determined that optimal aerosol deposition may be achieved by nebuliser placement on the dry side of humidifier. Similarly, Berlinski & Willis (2013) demonstrated in a paediatric model, that in the presence of bias flow, nebulisers were more effective when placed back at the humidifier as compared to closer to the wye.²⁻³ In the absence of bias flow optimal deposition was observed when the nebuliser was placed at or close to the wye in this adult model.⁴

Can you use a Heat and Moisture Exchange Device (with filter) (HME/HMEF) while delivering aerosol with the Aerogen Solo?

Yes, the Aerogen Solo is approved for use with a HME.¹ The Aerogen Solo should be placed between the patient and HME as detailed in the Aerogen Solo directions for use.¹ Note: Only a HME/HMEf approved for use with a nebuliser should be used. Follow the HME/HMEf manufacturer instructions regarding use with a nebuliser. Ensure the combination of nebuliser, T-piece and HME/HMEf volumes are suitable for the tidal volume being delivered, according to the patient size.

What are the advantages of Aerogen vibrating mesh nebulisers (VMN) compared with other nebulisers, or inhalers for adult and pediatric patients?

Aerogen vibrating mesh nebulisers are electrically powered, quiet and require no additional flow or pressure to operate, ensure a minimal residual volume and are suitable for use with physician prescribed solutions that are approved for use with a general-purpose nebulisers.¹ A narrative review by Lin et al. compared VMN with other, similar, during invasive mechanical ventilation.⁵

Can you deliver an effective dose with the Aerogen Solo to an adult patient during High flow therapy?

Both in vitro and in vivo studies have examined aerosol delivery efficiency via Aerogen devices concurrent with High Flow Nasal Oxygen therapy with adult models/patients⁶⁻¹⁰ These studies suggest that an effective dose may be delivered during concurrent High Flow Nasal Oxygen therapy and medication aerosolisation via the Aerogen Solo.⁶⁻¹⁰

Do different ventilator parameters affect aerosol delivery?

Yes, a range of ventilator parameters; including flow, inspiratory time (duty cycle), ventilatory mode, timing of nebulisation and circuit features; tube sizes, heat, and humidification, can affect aerosol delivery in mechanically ventilated patients.2,11-13 Reviews by Dr. Dhanani and others summarise the impact of these features on aerosol delivery.11,13

セキュリティコードを入力してください:

Aerogen コントローラー お問い合わせ

ご連絡ください

ご要望への対応

お問い合わせ

  1. 30-354 Rev U Aerogen Solo Instruction Manual.
  2. 30-763 Rev H Aerogen USB Controller System Instruction Manual.

GL1222B04-23